Ducted Fume hood Labo128DFH

Ducted Fume hoods are equipped with base cabinet and belt driven tubular centrifugal fan to safely propel fumes away. Dirty room air is drawn into the front of the fume hood. Room air mixes with potentially contaminated air from chamber and is pulled upward by building exhaust. Contaminated air can be drawn from fume hood by exhaust fan and leaves through air stacks. The duct rigorously removes toxic gases from the environment providing excellent user protection. Thick tempered glass sliding door makes for a safe work environment. Built-in drain pipe, Built-in axial fan, air collector and anti-corrosive hose are provided for easy operation.



Get Quote Generate Catalog

Overall dimension (L × W × H) 1200 × 800 × 2350 mm
Working area dimension (L × W × H) 950 × 700 × 1150 mm
Surface wind speed 0.3 to 0.6 m/s
Exhaust air volume 80 to 100 fpm
Blower Built-in axial flow blower; Speed adjustable
Light LED lamp
Exhaust duct diameter 250 mm
Sliding door thickness 5 mm
PP cup diameter 100 mm
Worktop thickness 12.7 mm
Inner lining board thickness 5 mm
Shell thickness 1.2 mm
Axial fan flow 110 W
Noise level ≤ 60dB
Weight 165 kgs

  • Physiochemical board with anti-corrosive, anti-acid properties
  • Tempered glass sliding door
  • Anti-corrosive, anti-acid compact panel
  • Main body covered with greyish epoxy –polyester paint
  • Three 10A multifunctional anti-splash sockets
  • 110 W axial fan flow with air velocity regulator
  • Desk mount low spout single faucet
  • The material of main body is 1.2mm thickness cold-rolled steel with epoxy resin powder coating, base cabinet equipment with adjustable mechanism
  • The material of inner side is 5mm thickness compact, resistant to strong acid and alkaline
  • The material of work table is chemical resistant, resistant to phenolic resin, 12.7mm thickness

Used in research & development processes, powder containment (e.g. pharmaceutical compounding) chemical fume control, mobile laboratories and field research, light acid etching, etc.