Equipment Corrosion Testing Apparatus Labo456CTC

LABONICS Labo456CTC Corrosion Testing Apparatus are used for relative corrosive testing. They are typically run at an elevated temperature and do not incorporate a dry-off cycle. The Spray requires continuous supply of heated, humidified air. Continuous salt spray exposures are widely specified for coatings for corrosion resistance and even for testing components. It is inclusive of the elimination of manual moving of test specimens from one chamber to another laborious spraying of test specimen’s variability in results from excessive specimen handling. They are also adapted to the surface treatment of various materials.

Get Quote Generate Catalog

Internal dimensions 1000*2000*800(mm)
Overall dimensions 1000*2000*800(mm)
Temperature range Ambient ~60°C
Humidity range 95% ~ 98% RH
Temperature fluctuations +/- 0.5 °C
Temperature deviation +/- 2.0 °C
Test time 1~999 hours, settable
Spray deposition 1~2ml / 80cm2 · h
Standard configuration Sample bracket / sample holder / spray nozzle / Fog collectors / measure cylinder

  • Microcomputer integrated controller Temperature Controller along with LED display, P.I.D+S.S.R
  • Salt Water Filtration with Water Filter near the Suction Tubes
  • Tower Spray and Nozzle Spray System
  • P.I.D+S.S.R Microcomputer Integrated Temperature Controller
  • Hydrostatic hood seal for Sealing Purpose
  • Spray type is continuous and also periodic

As they are used for coating for corrosion resistance and compounds they are widely opted in paint, electroplating, organic and inorganic coating of the metals, anode processing, and antirust oil.