LABONICS Labo902SDC Environmental Test Chamber is excellent in their work and are thus very reliable for the processes. Sand and Dust Test Chambers not only evaluate but also simulates the conditions of sand and dust to get the better results. As blowing Sand can cause erosion and can degrade paint, protective coatings, plastics and labels on vehicles and components. Gears, rotors, and seals of jet engines and turbines can also be damaged whereas Dust gets into areas of the product that can be detrimental to its operation. Parts such as Circuit boards, relays, moving parts and equipment with air intakes, filters and fluid reservoirs can all be dangerously affected when exposed to blowing dust.
| Internal Dimensions | 1000*1500*1000 |
| Overall Dimensions | 1250*1900*1960mm |
| Temperature Range | Ambient to ± 50℃ |
| Relative Humidity | <30% RH |
| Normal Wire Diameter | 50um |
| Normal Width of a gap between Wire | 75um |
| The Talcum Powder Amount | 4 kg ～ 4kg/m3 |
| Fight Time | 0～99H59M |
| Fan Cycle Time | 0～99H59M |
| Specimen Power Outlet | Dust Proof Socket AC 22OU16A |
| Vacuum System | Pressure Gauge, Air Filter, Pressure Regulator, Connecting Tube |
| Circulating Fan | Enclosed alloy low –noise mo tor,multi-vane centrifugal fan |
| Power Supply | 380V 50 Hz |
As Sand and Dust testing evaluates the ability of materials to be stored and resist the effects of dust and operated in blowing sand conditions without degrading its performance, effectiveness, reliability, and maintainability. Dust testing also determine the shelf life of product by performing a settling dust test. These Tests also determine any Failure points in the product and hence these are widely used in Automotive, Electric-Technical Products and Solar Energy
