LABONICS Labo621SFC offers a range of test chambers including the salt fog corrosion test chamber which are available in all different sizes and range. The salt spray test chambers are used in many industries as they help in corrosion resistant of the products. Salt fog is the dispersed system made up of tiny liquid drop which contains salt in air. It is used to create manual simulation salt mist environment to test anti-corrosion resistance of materials
Internal dimensions | 800*1900*850(mm) |
Overall dimensions | 1350*3000*1700(mm) |
Temperature range | 10°C ~110°C |
Humidity range | 30% ~ 98% RH |
Temperature tolerance | +/- 2.0 °C |
Humidity Tolerance | +2%,-3% |
Salt Concentarion Tolerance | ±1% |
Spray deposition | 1~2ml / 80cm2 · h |
Temperature sensor | Platinum resistance. PT100 / MV A-class |
Salt water filtration | With water filter near the suction tubes( Avoid the nozzle blockage) |
Salt water preheating | The temperature for salt water should be equal with workroom temperature |
Safety device | Humidifier dry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth Leakage protection and so on. |
Power Supply | 380V 50HZ Three-phase five little system |
Widely opted in Research Institutes for Research Purpose and also in Industries such as Automobile Industries, Painting and coating Industries