Corrosion Salt Spray Test Chambers Labo730CST

LABONICS Labo730CST Corrosion Salt Spray Test Chambers tests the ability to resist Corrosive Agents as the product are effected by Rust Damage. These are carried out to check the resistance of a material or a coating to the corrosion process which is triggered naturally with the reaction (chemical or electrochemical) to the aggression of oxidizing agents such as, atmospheric oxygen, moisture, gas, corrosive solutions. It can be used for all kinds of material surface treatment, including coating, electroplating, organic and inorganic coating, anodizing, rust proof oil and preservative treatment test so as to establish the quality of the products.

Get Quote Generate Catalog

Internal dimensions 450*600*400(mm)
Overall dimensions 800*1080*1080(mm)
Temperature range Ambient ~60°C
Humidity range 95% ~ 98% RH
Temperature fluctuations +/- 0.5 °C
Temperature deviation +/- 2.0 °C
Test time 1~999 hours, settable
Spray deposition 1~2ml / 80cm2 · h
Salt Water Preheating The temperature for salt water should be equal with workroom temperature

  • A programmable Microcomputer integrated Controller along with LED display, P.I.D+S.S.R
  • The Spray type can be Continuous/periodic
  • A Platinum Resistance Temperature sensor with PT100Ω / MV A-class
  • Metering Cylinder and a Standard Funnel is used for Collection of Salt Fog
  • Filtration is done by Water Filter near Suction Tubes
  • Tower spray and nozzle without crystallization (Fog is more fine and uniform distribution) in Spraying System
  • It is Corrosion resistive and shows high strength
  • Glass fiber reinforced plastics Material
  • A Hydrostatic Hood Seal

They check the resistant ability of Coating and can be used in many industries of Coating, Paint Industries and also to check the rusting and can act as preservative treatment test to check the quality of products.